Waterco Micron Side Mount Bobbin Wound Sand Filters

Waterco Micron Side Mount Bobbin Wound Sand Filters

Micron fibreglass filters embody the latest in fibreglass winding technology. Micron fibreglass vessels consist of an inner shell of fiberglass reinforced polyester resin wound over with fibreglass filament.

Features:

• Fishtail lateral pattern.
• Hydraulically balanced.
• Uses an average of 30% less water for backwashing.
• Maximises water flow and distribution.
• Large, easy access clear lid.
• Supplied with metric and imperial multiport unions.
• Large sand dump port.
• Pressure rated at 2.5 bar

Simple Maintenance

The effectiveness and efficiency of the filter is impaired by excessive build up of debris, clogging the media, which will result in pressure build up and poor circulation. Cleaning the filter simply requires turning the filter’s Multiport lever from the “filter” position to the “backwash” position, which reverses the flow of water in the filter, flushing the filter bed.

Reduced Water Flow Resistance

The 24” / 600mm filters are equipped with a 40mm Multiport Valve. The Micron ECO S602, S702, S800 & S900 are equipped with a hydraulically efficient 50mm Multiport Valve to reduce the filter’s overall resistance to water flow. The filter’s low water flow resistance, facilitates better performance from multi-speed and variable speed pumps.

Warranty Information

Waterco Multiport Valves 

Micron fibreglass filters embody the latest in fibreglass winding technology. Micron fibreglass vessels consist of an inner shell of fiberglass reinforced polyester resin wound over with fibreglass filament.